|
New
Products |
|
Updated Horizontal
Lifeline System
 |
|
|
HL3
Series -
Horizontal Lifeline System
Introducing
Gemtor’s updated single/multi span horizontal lifeline system. This system
is the perfect choice for bridge and building construction. Designed
for quick and easy mounting to structural I-Beams, this complete kit
includes everything you need to protect your workers while working/walking
at heights. Each system can be used on a span of up to 60 ft. and
multiple systems can be connected together and/or intermediates can be
added to cover greater spans. Mounting bolts located on
the top side of the stanchion base make mounting to beam safer and
easier than competitive models, zinc plated chain and quick insert pins
save time and increase durability. Stanchions are extremely strong
yet lightweight and mount on the beam at an angle to keep the lifeline
out of the worker’s way. New intermediate add-on stanchions allow
continuous runs of up to 180 ft.
Click
here to view flyer (pdf)
click here of similar products |
GEMTOR
#541NYC
Class II Fire Service Harness
|
|
Download flyer
(pdf)
 |
This
is the FDNY Personal Harness!
Exclusive Features:
-
Aluminum, 3-Stage locking Pompier hook with 2” side opening gate (NFPA
General Use Carabiner classified by UL) weighs less than 11 oz.
-
Extremely lightweight, weighs only 2.8 lbs! (including Pompier hook).
-
Forged alloy steel escape system attachment D-ring (not shown).
-
Sturdy, lightweight nylon webbing 1 ¾” wide stitched with high tenacity
nylon thread.
-
Easy waist belt operation, just engage steel snaphook and D-ring.
-
Available with right side or left side (FDNY style) opening.
-
Unique design lowers the body’s center of gravity and helps reduce the
possibility of toppling
Click here for
full specifications
Click here for
similar products |
|
Self-Retracting Lanyard
 |
 |
FLW - Fall Limiter
• Small (3.75” dia. x 2.375”
thick)
•
Lightweight (only 3 lbs.)
• Extremely strong die-cast
aluminum
• Polyester or aramid (Technora)
lifeline
• Locking snaphook
• External energy absorber
• Meets OSHA, ANSI A10.32
&
Z359.1 Standards
Download flyer
(pdf)
Click here for similair products
|
|
Rope
& Cable Grabs |
|
|
Model
# VW655 - Cable Grab
Stainless steel cable grab for use with 5/16" - 3/8" diameter stainless steel wire
rope (7x19 non-lubed aircraft cable). Can be attached, detached, and positioned at any point on the vertical lifeline. Weighs 1 1/2 lbs. An energy absorber lanyard shall be used for connection to a full-body harness.
Click here for similar Models
|
|
|
|
Model
# VF505 - Rope Grab
Automatic
energy absorbing rope grab follows a worker up and down a 5/8"-
3/4" diameter vertical synthetic lifeline. The unit's controlled,
shock-absorbing action eliminates the need for an energy absorbing
lanyard. The patented design allows the rope grab to be attached,
detached and positioned at any point on the vertical lifeline.
Weighs 1 1/2 lbs. and is made of stainless steel. New York State
Approval # 9502
Click
here for similar Models
|
|
Return
to top of page
|
|
Tie-Back
Lanyards
|
| INTRODUCING!
The
New TB
Series of Tie-Back Lanyards
|
|
This
lanyard is specifically designed so that the webbing may be
wrapped around an OSHA compliant structural support and the
automatic locking carabiner can be “snapped” back onto the
lanyard. Features include; captive locking carabiner for
tie-back or direct connection to anchorage, and dual layer, dual
color design. The black inner layer is made of high strength
polyester webbing, the yellow outer layer offers additional
strength, and helps protect the inner layer from abrasion and
cutting. The contrasting colors help the user identify when the
lanyard is severely worn. Meets OSHA, ANSI standards. |
 |
|
|
Similar
Items
|
Model #
TB1101L
Tie-Back Lanyard.
Soft-Pack energy absorber with 1 3/16" wide dual layer polyester web
Tie-Back lanyard. An integral locking snaphook is supplied for
attachment to your full-body harness and a captive automatic locking
carabiner is fitted at the opposite end for attaching to a suitable
anchor.
|
|
Return
to top of page
|
|
Similar
Items
|
Model #
TB1101LY
Tie-Back Lanyard for 100% tie-off.
Soft-Pack energy absorber with two (2) 1 3/16" wide dual layer polyester web
Tie-Back lanyards. An integral locking snaphook is supplied for
attachment to your full-body harness and a captive automatic locking
carabiner is fitted at each of the other two ends for attaching to a
suitable anchor. |
|
Return
to top of page
|
|
Rebar
Assemblies
|
More
Info |
RC Series - Chain Rebar Assembly
-
Zinc
plated, twist-link chain to prevent kinking.
-
Locking
snaphooks at leg ends.
-
Many
types of hooks available to provide compatible connection to
structure (see below).
-
Available
with or without swivel.
-
Available
in lengths to suit your application.
-
Meets
or exceeds all applicable industry standards including OSHA
and ANSI.
-
Union
Made in USA.
|
|
Return
to top of page
|
|
Sliding
Beam Anchor
|
|
Similar
Items
|
Model # SBA-1
Introducing
Gemtor’s new Model # SBA-1 Sliding Beam Anchor.
The Model # SBA-1 is made of stainless steel and can easily be
attached to the top or bottom flange of a structural I-beam.
The Model # SBA-1 is designed to follow the workers movement as he
works along the top of the beam or a working surface below the beam.
When used in conjunction with a full-body harness and energy
absorbing lanyard, the SBA-1 helps to provide a complete fall protection
solution for workers exposed to fall hazards.
A second sliding beam anchor may be used along with a twin leg
energy absorbing lanyard to provide 100% tie-off protection. Works
on beam flanges from 3 1/2” to 12” wide and up to 1 1/8”
thick. Weighs less than 5 lbs. Tether strap prevents snaphook
gate from contacting edge of beam when mounted on topside of I-Beam. Snaphook
compatible D-ring connection.
|
2005
2015